Oil Fume Purification All-In-One Machine

The oil fume purification all-in-one machine is a large-scale oil fume purification equipment specially developed for the catering industry. This machine is purify oil mist, odor and other harmful substances in the baking process. The purification equipment is equipped with combination elements such as gas collection, washing, reaction absorption, detergent circulation, mechanical filter, gas transportation, cooling and fire prevention, which is a collective collection-purification-transportation; environmental protection-fire protection-energy saving Integrated multi-energy and high-efficiency oil fume purification equipment.

Compared with the traditional oil fume purification process, it greatly simplifies the oil fume purification process and has low energy consumption; it does not occupy the ground area, saves land and reduces occupied space; the pipes and fans are not stained with oil, safe and fireproof; each unit has an independent combined structure. It is simple, easy to clean and maintain, and can be matched with any Chinese and Western cooking stoves. It is an indispensable new purification equipment for modern kitchens. The oil fume purification all-in-one machine makes up for the shortcomings of traditional technology, and is the best technical solution to replace the traditional water transportation oil fume hood + stiller (tower) + fan system.

The principle of oil fume purification：

Dynamic blue lampblack integrated machine:

Primary purification: The principle of condensation and collision removes large particles of oil fume. Utilizing the different saturated vapor pressures of gaseous pollutants at different temperatures and pressures, some pollutants will condense out under lowering the temperature or increasing the pressure, so as to achieve the purpose of purifying 60% of the domestic oil particles above 5 microns.

Secondary purification: The principle of dynamic shielding, to deal with large oil particles again. There is space on the screen itself. Under high-speed operation, the oil fume particles will pass through the gap due to the negative pressure generated by the external fan behind the network disk. When passing through the gap, due to the high speed of the network disk, the large particles The teacher was intercepted and recovered by the centrifugal force of the shield before he could pass through.

Three-stage purification: metal filter device, using numerical control technology, adopts the principle of gravity and collision, separates impurities and grease, and spreads air to make the lower-level electrostatic purification fully purified.

Features:

1. The air duct is oil-free and low-odor

2. The oil purification rate is as high as 80%, saving electricity by 50% for multiple units, and each integrated machine is completely independently controlled

3. Cleaning and maintenance are convenient and fast, and there is no other cost consumption

4. Fire prevention, energy saving, turning waste into treasure, recyclable waste oil can be made into biodiesel

5. The wind direction of the air outlet can be adjusted flexibly

6. Collection, purification, and transportation are integrated, occupying a small space and low noise

Clean blue oil fume all-in-one machine:

Primary purification: The principle of condensation and collision removes large particles of oil fume. Utilizing the different saturated vapor pressures of gaseous pollutants at different temperatures and pressures, some pollutants will condense when the temperature is lowered or the pressure is raised, so as to achieve the purpose of 60% purification and recovery of oil above 5 microns.

Secondary purification: The metal filter western device adopts numerical control technology, adopts the principle of gravity and collision, separates impurities and grease, and distributes the air to make the lower-level electrostatic purification fully purified.

Three-stage purification: The principle of electronic electrostatic smoke purification, stainless steel ionizer, ionizes the gas, and the strong electric field charges the particles to become charged particles. Aluminum alloy integrator, after the charged particles reach the second stage of the integrator, the particles hit the collecting plate and are immediately absorbed by the collecting electrode, and more than 90% of the pollutants are filtered out. Can effectively collect particles larger than 0.1 microns

Features:

1. The air duct is oil-free, smoke-free and low-odor

2. The purification rate is as high as 95%, and the direct discharge standard smoke removal rate is 70%.

3. Multiple sets save electricity by 50%, semi-assembled transportation cost is 30% lower

4. Touch panel, one-button start

5. Turning waste into treasure, recycled waste oil can be made into biodiesel

6. The wind direction of the air outlet can be adjusted flexibly

7. Collection, purification, and transportation are integrated into one, occupying a small space,

Dynamic blue lampblack integrated machine:

First-level purification: The principle of condensation and collision can remove large particles of oil fume. Utilizing the different saturated vapor pressures of gaseous pollutants at different temperatures and pressures, some pollutants will condense when the temperature is lowered or the pressure is raised, so as to achieve the purpose of 60% purification and recovery of oil particles larger than 5 microns.

Secondary purification: The principle of dynamic screen and sparse, to deal with large oil particles again. There is a gap on the shield itself. Under high-speed rotation, the oil fume particles will pass through the gap due to the negative pressure generated by the external fan behind the grid. When passing through the gap, due to the high speed of the network disk, the large particles are too late When it passes through, it will be intercepted and recovered by the centrifugal force of the shield.

Three-level purification: Jinzhan dew filtration device adopts numerical control technology, adopts the principle of gravity and collision, separates impurities and grease, and distributes air and air, so that the lower-level electrostatic purification can fully purify.

Four-stage purification: The principle of electronic electrostatic smoke purification, stainless steel ionizer, ionizes the gas, and the strong electric field electrifies the particles, or the charged particles. Silver alloy integrator, after the charged particles reach the second stage of the integrator, the particles hit the collecting plate and are immediately absorbed by the collecting electrode, and more than 90% of the pollutants are filtered out. It can effectively collect particles larger than 0.1 micron.

Five-level purification: UV deodorization treatment, UV lamps have two bands of 254nm and 185nm. When the oil fume passes through the UV lamp tube, the 254nm ultraviolet rays cut off the molecular chains of the oil to form small oil molecules. White powder, the oil in the fume is hydrogenated by photolysis, and most of the peculiar smell in the flue is also removed

Features:

The air duct is oil-free, visually smoke-free, and low-odor

1. The purification rate is as high as 98%, and the direct discharge meets the standard

90% net smoke rate, no smoke by visual inspection, 60% net odor rate, not pungent

2. Multiple sets save electricity by 50%, semi-assembled transportation cost is 30% lower

3. Invisible air curtain, oil fume does not overflow

4. Touch panel, one-button start

5. Turn waste into treasure, recycled waste oil can be used to make biodiesel

6. The wind direction of the air outlet can be adjusted flexibly

7. Collection, purification, and transportation are integrated, occupying a small space and low noise

1. The use method of the oil fume purifier is relatively simple. It can be put into use after it is installed correctly and correctly connected to the power supply system, and then the control switch of the purifier is turned on.

2. Before using the linkage device, turn on the power control switch of the linkage device, and then turn on the fan control switch. When the fan is turned on, the oil fume purifier will also run synchronously. When it needs to be turned off, first turn off the linkage control power supply, and then turn off the fan power supply.

3. If there is no linkage device, first turn on the fan control switch and then start the oil fume purifier control switch. When closing, first turn off the oil fume purifier control switch, and then turn off the fan control switch.

Precautions：

1. Please read this manual carefully before installing and using the smoke purifier product, and keep the manual properly for future reference.

2. The maintenance of the oil fume purifier should entrust professionals to install, maintain and overhaul the oil fume purifier.

3. Oil fume purifier In order to ensure the effect of the equipment and the safety of users, the operator must use the equipment correctly in strict accordance with the requirements of the oil fume purifier manual.

4. For the oil fume purifier with power supply, it must be reliably grounded. The power supply should be connected to the corresponding mains power - 220V or - 380V according to the instruction manual. The output terminal of the frequency converter is connected to the power supply to avoid damage to the oil fume purifier equipment;

5. The interior of the electrostatic oil fume purification equipment has high voltage when it is working. Before the main power supply is cut off, it is strictly forbidden to disassemble the equipment box and power supply of the electrostatic oil fume purifier.

6. The equipment must be cleaned and maintained regularly. Improper cleaning and maintenance of the equipment will damage the purification equipment.